We offer small and sleek RS 485 interface slave readers, which require up to 20 meter distance from the machines. These slave readers are available in two type :

• Smart card slave reader (Mifare RS 485 reader) with dimension 7.7x11.5 cm
• Proximity Card Slave Reader (EM RS 485 reader) with dimension 7.7x11.5 cm

We offer smart card slave readers, which are used along with a main reader where IN/OUT punching is to be separated. These are also used with min readers for the access control to open the door from both the side through smart card. All these systems are RS 485 communication based slave readers, which can be fitted up to 20 meter from main reader.

We offer proximity card slave readers, which are used with a main proximity readers (EM4100 type). These slave readers can be used with those smart card systems where IN/OUT punching is to be separated or access control is required to open the door from both the side. Our proximity card slave readers are RS485 communication based, which can be fitted up to 20 meter from main reader.

Smart Card Mifare Reader directly connects to PC through USB.

This unique USB connected MiFare Smart Card Reader Connects to PC through USB. It reads Contact less Cards and transmits data directly to PC. It does not need RS485, RS232 and RJ45 connection interface.

It supports USB Version 2.0 full speed. It is Plug & Play USB Device. It's a USB powered device. It does not need any external power source. It supports Operating System Windows and Linux based PC.

It reads unique card number and transmits the data to PC, which can be further processed by application software to do required task OR to generate reports.

The device can be wall mounted and is suitable for outdoors and indoors. It uses extremely low power and has a reading distance of 60 mm (2.4 inch).

The device's space efficient design is ideal for use on doorframes. The reader is small and discreet, and can be easily recessed into an interior wall or be mounted on equipment such as a printer or copier.

Every employee is issued with an inexpensive Mifare smart card. Each card has a unique built-in code, and so identifies each employee.

• MiFare - (ISO/IEC 14443 A) frequency 13.56 MHz Smart card compatible.
• 60 mm reading distance.
• USB powered device.
• Can be used as a stand-alone Mifare Smart Card Reader, directly connects to PC.
• USB 2.0 Full Speed Compatible.
• Operating system Windows and Linux compatible.

Card Reader method:	Smart Card/contact less Transponder.
Connection:	USB Version 2.0 Full Speed Compatible.
Dimensions:	74 x 116 x 18 mm